Configuring CloudNippon SIP Trunk
With MyPBX

Configuring a VoIP Trunk

Step 1: Create an Account with CloudNippon

Step 2: Add the VoIP Provider Account in MyPBX

After you get the VoIP provider account, you need to configure the account in MyPBX.

1. Go to PBX > Trunks > VoIP Trunk page and click Add VoIP Trunk.

2. Enter the SIP account details into the pop-up window.

Trunk Name: customize your trunk name here.

Hostname/IP: enter the VoIP provider hostname, siptrunk1.cloudnippon.com

Domain: enter the domain, siptrunk1.cloudnippon.com

User Name: your CloudNippon Account user name

Authorization Name: the same as the user name

Password: your CloudNippon Account password

3. Click Save button and Apply Changes. Go to Status > Line Status > Trunk Status to check if the Service Provider trunk is connected successfully.

Outbound Route with CloudNippon SIP Trunk

To make outbound calls via the new created SIP trunk, you need configure an outbound route for the trunk.

1. Go to PBX > Outbound Call Control > Outbound Routes, click Add Outbound Route.

2. Configure the outbound route.

Route Name: give the outbound route a name.

Dial Patterns: set the dial patterns. As the settings below, to make calls via the CloudNippon SIP trunk, you need to precede the number to be dialed with the prefix 8.

Dial Pattern: 8.

Strip: 1

Member Extensions: select the extensions that are allowed to make calls through the outbound route.

Member Trunks: select the CloudNippon SIP trunk.

3. Click Save and Apply Changes. Now you can make outbound calls through the CloudNippon SIP
trunk. As the dial patterns configured above, you need dial digit 8 before the destination number.
For example, to call the number 17373621819, you need dial 817373621819 on your phone.

Inbound Route with CloudNippon SIP Trunk

Specify how calls from the CloudNippon SIP trunk should be routed. You need configure an inbound route
for the SIP trunk.

1. Go to PBX > Inbound Call Control > Inbound Routes, click Add Inbound Route.

2. Configure the inbound route.

Route Name: give the inbound route a name.

Member Trunks: choose the CloudNippon SIP trunk.

Day Destination: select the destination when the time matches the times defined in the Time Group, generally your office time.

Night Destination: select the destination when the time does not match the times defined in the Time Group, generally your non-office time.cloudnippon