Configuring a VoIP Trunk

Step 1: Create an Account with the Cloudnippon VoIP Provider

To start with, you need to have an account from the Cloudnippon VoIP provider. Please visit the website to
get a SIP account: https://cloudnippon.com

Step 2: Add the VoIP Provider Account in IPPBX

After you get the VoIP provider account, you need to configure the account in IPPBX.

1. Go to Basic > Trunks > VoIP Trunks page and click New VoIP Trunk.

cloudnippon_zycoo_IPPBX

2. Enter the SIP account details into the pop-up window.

cloudnippon_zycoo_IPPBX

Trunk Name: customize your trunk name here.

Hostname/IP: siptrunk.cloudnippon.com

Domain: siptrunk.cloudnippon.com

User Name: your Cloudnippon Account user name

Authorization Name: the same as the user name

Password: your Cloudnippon Account password

3. Click Save button and Activated Changes. Go to Operator to check if the Service Provider trunk is connected successfully.

cloudnippon_zycoo_IPPBX

Outbound Route with Cloudnippon SIP Trunk

To make outbound calls via the new created SIP trunk, you need configure an outbound route for the trunk.

1. Go to Basic > Outbound Routes, click Add DialRules > New Dialrule.

cloudnippon_zycoo_IPPBX

The rule means it can allow over and equal 5digits number for outgoing ,e.g 10000 or other number 85337096

2. Go to Basic > Outbound Routes, click > DialPlans > Dialplan1 > Edit

cloudnippon_zycoo_IPPBX

Tick the rule,then you can call out

Inbound Route with Cloudnippon SIP Trunk

Specify how calls from the Callacloud SIP trunk should be routed. You need to configure an inbound route for the SIP trunk.

cloudnippon_zycoo_IPPBX

Then when you make an incoming call and you can hear the default prompt.